Ingersoll-Rand 22108815 Filter Core for Screw Air Compressors

A Filter Core is the essential, replaceable inner component of a filtration system that performs the critical task of physically separating contaminants from fluids (liquid or gas). As the consumable element of the system, it traps and retains unwanted particles while allowing clean media to pass through. Consider it the "heart" of the filter housing - while the housing remains permanent, the core requires replacement to maintain system performance and fluid cleanliness.

The primary function of a filter core is to protect downstream components and ensure fluid integrity. Specific purposes include:

• Contaminant Removal: Capturing and retaining particulate matter (dirt, metal shavings, rust, soot) from fluids
• Component Protection: Safeguarding sensitive equipment like pumps, valves, actuators, and nozzles from wear and damage
• Fluid Quality Maintenance: Preserving chemical properties and cleanliness of hydraulic oil, fuel, coolant, air, or process gases
• System Efficiency: Maintaining optimal performance by preventing pressure drops and flow restrictions
• Water Separation: Certain filter cores are designed to remove water from fuel or oil

Filter cores operate through a combination of physical mechanisms:

• Surface Filtration: Membrane or wire mesh captures particles larger than its pore size (common in sieve-type filters)
• Depth Filtration: Fluid passes through thick porous media where contaminants are trapped throughout the entire depth via adsorption, impingement, or inertial forces
• Adsorption: Certain media (like activated carbon) chemically attract and hold dissolved contaminants

The filter core is housed in a pressure-rated vessel. Contaminated fluid enters and flows from the outside inward, with contaminants trapped on the outer surface or within the media matrix, while clean fluid exits through the inner core.

• Filtration Rating: Nominal (e.g., 10 micron) and Absolute (e.g., 3 micron)
• Beta Ratio (βx): Measure of efficiency (e.g., β₅ = 1000 means 99.9% of particles 5µm+ are captured)
• Dirt Holding Capacity: Grams of standard test contaminant held at specific pressure drop
• Collapse/Burst Pressure: Maximum pressure differential the core can withstand
• Media Material: Cellulose, Microglass, Synthetic, Sintered Metal, Wire Mesh
• End Cap Material: Steel, plastic, or composite compatible with various fluids
• Seals: Buna-N, Viton, EPDM, or Silicone O-rings for leak-free operation

Filter cores are used wherever fluid power or processing exists:

• Mobile Hydraulics: Construction, agricultural, and forestry machinery
• Industrial Hydraulics: Presses, injection molding machines, CNC equipment
• Lubrication Systems: Gearboxes, turbines, compressors
• Power Generation: Fuel filtration for turbines and diesel generators
• Transportation: Engine oil, fuel, and air filtration for trucks and buses
• Manufacturing: Coolant filtration for machining processes, paint spray lines
• Chemical Processing: Filtering process fluids and additives

To select the correct filter core, you will need:

• OEM Part Number: From your current filter or housing
• Housing Make/Model: Manufacturer and model of the filter housing
• Application: (e.g., Hydraulic Pressure Line, Return Line, Suction, Fuel, Air)
• Fluid Type: (e.g., Petroleum Oil, Phosphate Ester, Water Glycol, Diesel Fuel)
• Required Micron Rating: (e.g., 10 Micron Absolute)
• Operating Parameters: System pressure and temperature

Don't risk equipment failure. Ensure optimal performance by using genuine quality filter cores. Contact our filtration specialists today for cross-reference and technical assistance.